Programmes aus
21
Programme Consumption values
1) Duration in
hrs:mins
2) Energy consump-
tion in kWh
3) Water consump-
tion in litres
Use Programme se-
quence
Machine Care
¡ 1) 2:10
¡ 2) 1,350
¡ 3) 15,2
Use only if appliance is
unloaded.
Machine Care 70°C
Favourite
¡ 1) 0:15-0:15
¡ 2) 0,050-0,050
¡ 3) 4,0-4,0
- -
Information for test institute
Test institutes can request the condi-
tions for comparison tests, e.g. ac-
cording to AS/NZS2007, by sending
an e-mail to dishwasher@test-appli-
ances.com.
These are the conditions for conduct-
ing the tests, however not the results
or consumption values.
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rat-
ing plate on the appliance door.
Open ajar using a block of approxim-
ately 100mm upon completion of
dry test.
Favourite
You can save a combination of a pro-
gramme and an additional function to
the button.
You can save the program via the
Home Connect app or on the appli-
ance.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermedi-
ate cleaning via cold rinsing.
When programmes have been down-
loaded and on delivery of the appli-
ance, the name of the programme
will be displayed in the app. The dis-
play alternately shows "AP:P" and the
remaining running time.
Tip:You can use the Home Connect
app to download additional pro-
grammes and save them to the
button.
1
Save Favourite on the appliance.
1. Press .
2. Press the right programme button.
3. Press the button for the relevant
additional function.
→"Additional functions", Page22
4. Press for approx. 3seconds.
a The selected programme and the
additional function will flash.
a flashes.
a The programme and the additional
function are saved.
1
Depending on the appliance specifications
To Next Page
Loading...
Need help?
General
