Basic operation aus
33
Removing tableware
WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
▶
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
1. To prevent water dripping on the
tableware, unload it starting at the
bottom and working up.
2. Check the washing tank and ac-
cessories for soiling and clean if
necessary.
→"Cleaning and servicing",
Page39
Basic operation
Basic operation
Basic operation
Opening appliance door
1. If the childproof lock is not activ-
ated, open the appliance door.
2. If the childproof lock is activated,
press the catch of the lock to the
right and open the appliance
door .
Switching on the appliance
▶
Press .
The programme last selected and
the additional function last selec-
ted will be set by default.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
▶
Press the right programme button.
a The programme is set and the pro-
gramme button flashes.
a The remaining running time of the
programme appears on the dis-
play.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note:The additional functions which
can be used depend on the pro-
gramme selected.
▶
Press the button for the relevant
additional function.
→"Additional functions", Page22
a The additional function is set and
the additional function button
flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24hours.
1. Press or .
a "00h:01m" appears on the display.
2. Use or to set the re-
quired start time for the pro-
gramme.
To Next Page
Loading...
Need help?
General
