aus Basic settings
36
Basic setting Display text Selection Description
Start programme SP:00
1
SP:00 - SP:01 Set a default programme for when
the appliance is switched on.
¡ With the setting "SP:00", the last
programme selected and the last
additional function selected are
set by default when the appliance
is switched on.
¡ With the setting "SP:01", the
standard programme is set by de-
fault when the appliance is
switched on.
Tone volume SL:02
1
SL:00 -SL:03 Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Button volume bL:02
1
bL:00 - bL:03 Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Wi-Fi Cn:00 Cn:00 - Cn:01 Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the HomeConnect app.
→"HomeConnect ", Page37
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→"Remote Start ", Page38.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→"Activating Remote Start ",
Page38
¡ With the setting "rc:02", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the HomeConnect app.
→"HomeConnect ", Page37
1
Factory setting (may vary according to model)
To Next Page
Loading...
Need help?
General
