Safety instructions en
9
Childproof lock (button lock)
Bu t t o n lock
You can prevent your
dishwasher being switched off
inadvertently (e.g. by children
pressing the buttons).
Here’s how to activate the
button lock:
1. Start the desired
programme.
2. Press and hold the F button
for about 4 seconds.
In the display window you
will see ’–.
The button lock has now been
activated.
If any of the buttons are
pressed while the programme
is running, ’– will appear in the
display window. It is not
possible to cancel the
programme (Reset).
To deactivate the button lock,
hold down the F button for
about 4 seconds until ’–
disappears from the display
window.
The button lock is cancelled
automatically at the end of the
programme. In the event of a
power failure, the button lock
will be maintained. You need to
reactivate the button lock at the
beginning of every programme.
Damage
■ The appliance may be
repaired and opened up by a
technician only. To do this,
disconnect the appliance
from the power supply. Pull
out the mains plug or switch
off the fuse. Turn off the tap.
■ If the appliance is damaged,
especially the control panel
(cracks, holes, broken
buttons), or the door function
is impaired, stop operating
the appliance. Pull out the
mains plug or switch off the
fuse. Turn off tap, call
customer service.
Disposal
1. Make redundant appliances
unusable to prevent
subsequent accidents.
2. Dispose of the appliance in
an environmentally friendly
manner.
To Next Page
Loading...
Need help?
General
