14 | English
2 609 140 838 | (20.4.11) Bosch Power Tools
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
1 Button for operation mode “Drywall”
2 Display-illumination button
3 Battery lid
4 Audio signal button
5 On/Off button
6 Button for operation mode “Metal”
7 Display
8 Marking hole
9 Illuminated ring
10 Contact pads
11 Sensor area
12 Type plate
13 Protective pouch
The accessories illustrated or described are not included as standard delivery.
Display Elements
a Indication of the object type “Live conductor”
b Warning-function indicator
c Measuring indicator of “Live conductor”
d Temperature control indicator
e Battery indicator
f Measuring indicator for operation modes “Metal” and “Drywall”
g Indication of the object type “Non-metal object”
h Operating-mode indication “Drywall”
i Indication of the object type “Magnetic metal”
j Operating-mode indication “Metal”
k Indication of the object type “Non-magnetic metal”
l Switched-off audio signal indicator
Technical Data
Digital Detector PMD 10
Article number
3 603 F81 000
Maximum scanning depth*
– Ferrous metals
– Non-ferrous metals (copper)
– Live conductors 110–230 V (voltage applied)**
– Wood
100 mm
80 mm
50 mm
25 mm
Automatic switch-off after approx.
5min
Operating temperature
–10 °C...+50 °C
Storage temperature
–20 °C...+70 °C
Battery
1x9V6LR61
Operating life time, approx.
5h
Weight according to EPTA-Procedure 01/2003
289 g
*depending on operating mode, material and size of the objects, as well as material and condi-
tion of the base material
**less scanning depth for wires/conductors that are not “live”
f In terms of accuracy, the measuring result can be inferior in case of unfavourable sur-
face quality of the base material.
Please observe the article number on the type plate of your measuring tool. The trade names
of the individual measuring tools may vary.
OBJ_BUCH-1380-004.book Page 14 Wednesday, April 20, 2011 10:12 AM
To Next Page
Loading...
