Installation (only for approved contractors)
Power Charge 7000i – 6721849906 (2022/11)
34
▶ Perform the electrical connections following the most
suitable option.
Fig. 37 Electrical connections supply
A = 1 phase installation
B = 3 phase installation
Table 10 Electrical connections supply
Always use standard cables that can drive the current that has
been set up in the current selector.
▶ Use the selector to select the maximum input current of the
device.
Fig. 38 Max. current selector (S3)
Table 1 Max. current selector
The following two steps are optional.
Dimensions (mm)
a 10 – 20Ø
max. 5 x 6 mm
2
0010044550-001
a
Selector Max current selector
06A
1 8A
2 10A
3 12A
4 14A
5...9 16A
0010044547-001
S3
To Next Page
Loading...
