Installation (only for approved contractors)
31
Power Charge 7000i – 6721849906 (2022/11)
4 Installation
(only for approved contractors)
4.1 Power Charge 7000i preparation
▶ Carefully remove the cover [5] and the cap with the
parking holder [7] from the Power Charge 7000i
( Fig. 25, page 29).
▶ Remove the supply line caps following the suitable
installation location for the Power Charge 7000i.
The installation location C must be weatherproof.
Fig. 30 Supply line from the bottom
Fig. 31 Supply line from the center
Fig. 32 Supply line from the top
This step is optional.
▶ Remove the internal interface connections’ cap.
Fig. 33 Internal interface connections’ cap removal
0010044536-001
0010044537-001
0010044538-001
0010045337-001
To Next Page
Loading...
