English | 13
Bosch Power Tools 1 609 929 W96 | (10/5/10)
13 Mounting holes
14 Drill holes for material clamp
15 Recessed grips
16 Drill holes for extension bars
17 Material clamp
18 Stop screw for 45° bevel angle (vertical)
19 Clamping lever for various bevel angles
(vertical)
20 Roller
21 Dust bag
22 Blade guard
23 Transport handle
24 Transport safety-lock
25 Sawdust ejector
26 Metal bar of tilt protector
27 Stop screw for 0° bevel angle (vertical)
28 Allen key (size 6 mm)/Phillips screwdriver
29 Allen screws (6 mm) of the fence
30 Holes for metal bar of tilt protector
31 Fastening screw for metal bar of tilt protec-
tor
32 Phillips screw
33 Spindle lock
34 Allen screw (size 6 mm) for mounting of saw
blade
35 Clamping flange
36 Saw blade
37 Tool spindle
38 Extension bar
39 Wing bolt
40 Threaded rod
41 Angle indicator (vertical)
42 Screws for insert plate
43 Screw for angle indicator (horizontal)
44 Scale for bevel angle (vertical)
45 Screw for angle indicator (vertical)
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 61029.
Typically the A-weighted noise levels of the
product are: Sound pressure level 102 dB(A);
Sound power level 115 dB(A). Uncertainty
K=3dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 61029:
Vibration emission value a
h
=3.0 m/s
2
, Uncer-
tainty K =1.5 m/s
2
.
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 61029 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Chop and Mitre Saw GCM 10
Professional
Article number
3 601 M20 190
Rated power input
W 2000
Rated voltage
V 220/240
Frequency
Hz 50/60
No-load speed
min
-1
4500
Weight according to
EPTA-Procedure
01/2003
kg 14.5
Protection class
/II
Permissible workpiece dimensions (maximal/minimal)
see page 18.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dimension of suitable saw blades
Saw blade diameter
mm 254
Blade thickness
mm 1.4–2.5
Mounting hole diameter
mm 30
OBJ_BUCH-1247-001.book Page 13 Monday, May 10, 2010 10:21 AM
To Next Page
Loading...
