Bosch PRS-1AIP1 - Power, Fault & Temperature; Restart Page

Bosch Security Systems | 2008-12
PRS-1AIP1 IP Audio Interface | Installation and User Instructions | Operation en | 22
4.1.5 Power, Fault & Temperature
Visual indication of the power, fault and temperature
status.
Main PWR (values in Volt)
• Green box: main power supply (17) OK
• Yellow box: main power supply (17) fault
Back-up PWR (values in Volt):
• Green box: back-up power supply (16) OK
• Yellow box: back-up power supply (16) fault
Fault Relay
• Green box: no fault detected
• Yellow box: fault detected
Internal Temp. (°C)
• Green box: temperature is below the set limit
• Yellow box: temperature exceeds the set limit
4.2 Restart page
The RESTART button on top of the web browser page
is used to restarting the device after configuration or
when the device is not working properly.
Restart the unit
Click RESTART on top of the web browser page.
Then click Restart the unit to restart the device. During
the restart a countdown screen is displayed.
After the successful restart is confirmed, leave the
RESTART page by clicking any other menu item at the
top of the page.
l
figure 4.2: Restart screen