Positioning and connecting en
13
5 Positioning and
connecting
Positioning and connecting
Included with the appliance
Note: Check that the machine has not
been damaged in transit.Never use a
damaged machine. If you have any
problems, contact the dealer from
whom you purchased the appliance or
our after-sales service.
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water drain hose to a siphon.
Useful tools
■ Spirit level for making sure the
appliance is level
■ Spanners, size:
– WAF13 for removing the transit
securing devices and
– WAF17 for making the
appliance's feet level
Safety instructions
:Warning
Risk of injury!
■ The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■ When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■ If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
( Mains cable
0 Bag:
■ Installation and operating
instructions
■ After-sales service location
directory*
■ Warranty*
■ Cover caps for fitting over
openings once the transit
securing devices have been
removed
■ Spanner*
#
3
+
8 Water supply hose on aquaStop
models
@ Water drain hose
H Elbow for securing the water
drain hose*
P Water supply hose on standard/
AquaSecure models
* Depending on the model
To Next Page
Loading...
Need help?
General
