en Intelligent dosing system
42
3. Press down the insert and remove
the drawer completely.
4. Press the pump unit insert and
remove it.
5. Unclip the rear detergent drawer lid
and remove it.
6. Empty the detergent drawer.
7. Clean the pump unit with a damp
cloth.
Caution!
The pump unit contains electrical
components.These may be
damaged if they come into contact
with water.
– Do not clean the pump unit in the
dishwasher and do not immerse
it in water.
– Protect the rear plug against
water, detergent and fabric
softener residue.
8. Clean the drawer, inside surface and
lids with a soft, damp cloth or a hand
shower.
9. Dry the drawer, lids and pump unit
and put them back together.
To Next Page
Loading...
Need help?
General
