Troubleshooting en
49
Troubleshooting
19 Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
Tip:You can find further information and explanations on troubleshooting on-
line by scanning the QR code in the table of contents and on our website
www.bosch-home.com.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist
staff.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Fault Cause and troubleshooting
Display "Check water
supply" flashes
A technical fault is present.
1. Press .
2. Unplug the appliance or switch off the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appliance in a socket
or switch on the fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press .
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact Customer Service →Page56 and give
the error code.
E:30-00 will light up
alternately.
Water protection system is activated.
1. Turn off the water tap.
2.
Call Customer Service →Page56.
E:31-00 will light up
alternately.
Water protection system is activated.
1. Turn off the water tap.
2.
Call Customer Service →Page56.
E:32-00 will light up
alternately or indicator
for water supply lights
up.
Supply hose is kinked.
▶ Install the inlet hose without kinks.
Water tap is turned off.
▶ Turn on the water tap.
To Next Page
Loading...
Need help?
General
