Cookware test en
13
Display Setting Value
Setting automatic start - Switched off.
– Switched on.
1
Setting the run-on
If your hob is working in air extraction mode,
the ventilation system is switched on at the
power level for approx. 6 minutes.
If your hob is working in circulating-air mode,
the ventilation system is switched on at the
power level for approx. 30 minutes.
The run-on function automatically switches
off after this time.
- Switched off.
- Switched on
1
:
Restoring factory settings - Individual settings
1
.
- Factory settings.
1
Factory setting
15.2 To go to the basic settings
Requirement:The hob must be switched off.
1.
To switch on the hob, touch .
2.
Within the next 10seconds, touch and hold for
fourseconds.
Product information Display
Directory for the technical after-sales
service (TK)
Production number
Production number 1 .
Production number 2 .
a The first four displays provide the product informa-
tion. Touch or to view the individual displays.
3.
Touch to access the basic settings.
a and light up alternately as well as as a preset
value.
4.
Touch repeatedly until the required function is
displayed.
5.
Use or to select the required value.
6.
Touch and hold for four seconds.
a The settings are saved.
15.3 Exiting the basic settings
▶
Touch to switch off the hob.
Cookware test
16 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. →Page12
16.1 Carrying out Cookware test
1.
At room temperature, place the cookware with ap-
prox.200ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select .
3.
Touch or . The display flashes in the cooking
zones.
a The function has been activated.
a After 10 seconds, the result appears in the cooking
zone displays.
16.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
Note:If you have any unfavourable results, reposition
the cookware on a smaller cooking zone, if available.
Touch or to activate the function.
Cleaning and servicing
17 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
To Next Page
Loading...
Need help?
General
