14/24 Control panels CP1 and CP2 | About this product
BoschRexrothAG, RE95259-01-B/2021-11-09
5 About this product
5�1 Product description CP1
The control panel CP1 is only intended for use in applications featuring hitch
control with Rexroth control units and with EHC software installed.
This control panel is intended for being used in agricultural technology.
There are two versions:
• Analog control panel
• CAN control panel
2
a b c d
9
8 4 6
1 10 11 7 5 3
Fig� 3: Operating elements CP1
1 Excavation lever (4 positions)
a Transport, lift
b Stop
c Control, lower
d Float, quick retract
2 Lock (transport)
3 Lowering speed setting
4 Setpoint value setting for lifting gear settings
5 Limitation to upper end position
6 Mixture
Stepless adjustment between tractive force and position control
7 Light: Diagnosis
8 Light: Lifting
9 Light: Lowering
10 Push-button for vibration damping
11 Light: Vibration damping
Operating elements
To Next Page
Loading...
