4/24 Control panels CP1 and CP2 | About this documentation
BoschRexrothAG, RE95259-01-B/2021-11-09
1 About this documentation
1�1 Validity of the documentation
This documentation applies to the following products:
• Control panel CP1
• Control panel CP2
This documentation is intended for machine/system manufacturers,
assemblers and service engineers.
This documentation contains important information on the safe and proper
transport, installation, commissioning, operation, maintenance, disassembly and
simple troubleshooting of the product.
▶ Read this documentation completely, in particular chapter2 "Safety instructions"
on page7 and chapter 3 "General instructions on property damage and
product damage" on page12 before you start working with the product.
1�2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the
book symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Control panel CP1
Contains the permissible technical data,
ports and main dimensions of standard
versions.
95255 Data sheet
Control panel CP2
Contains the permissible technical data,
ports and main dimensions of standard
versions.
95256 Data sheet
1�3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1�3�1 Safety instructions
This documentation contains safety instructions in chapter2.6
"Product-specific safety instructions" on page10 and in chapter3
"General instructions on property damage and product damage" on page12,
as well as before asequence of actions or an instruction for action involving arisk
of personal injury and property damage. Always follow the measures for danger
prevention associated with the use of this product.