Table of Contents
Page
1 System Presentation...................................................................................................... 5
1.1 Brief Description of the VDP 08.3/40.3 Operator Terminals ................................................................. 5
1.2 Variants................................................................................................................................................... 5
1.2.1 Characteristic Features....................................................................................................................... 5
1.2.2 Displays with Touch Screen and Keys................................................................................................ 5
1.2.3 VDP 08.3 ............................................................................................................................................ 6
1.2.4 VDP 40.3............................................................................................................................................. 7
1.3 Accessories............................................................................................................................................ 7
1.4 Commissioning....................................................................................................................................... 7
2 Important Instructions on Use ....................................................................................... 9
2.1 Appropriate Use ..................................................................................................................................... 9
2.1.1 Introduction.......................................................................................................................................... 9
2.1.2 Areas of Use and Application.............................................................................................................. 9
2.2 Inappropriate Use................................................................................................................................. 10
3 Safety Instructions for Electric Drives and Controls .................................................... 11
3.1 Definitions of Terms.............................................................................................................................. 11
3.2 General Information.............................................................................................................................. 12
3.2.1 Using the Safety Instructions and Passing Them on to Others......................................................... 12
3.2.2 Requirements for Safe Use............................................................................................................... 12
3.2.3 Hazards by Improper Use.................................................................................................................. 13
3.3 Instructions with Regard to Specific Dangers....................................................................................... 14
3.3.1 Protection Against Contact with Electrical Parts and Housings......................................................... 14
3.3.2 Protective Extra-Low Voltage as Protection Against Electric Shock ................................................ 15
3.3.3 Protection Against Dangerous Movements....................................................................................... 15
3.3.4 Protection Against Magnetic and Electromagnetic Fields During Operation and Mounting.............. 17
3.3.5 Protection Against Contact With Hot Parts........................................................................................ 17
3.3.6 Protection During Handling and Mounting......................................................................................... 17
3.3.7 Battery Safety.................................................................................................................................... 18
3.3.8 Protection Against Pressurized Systems........................................................................................... 18
3.4 Explanation of Signal Words and the Safety Alert Symbol................................................................... 19
4 Technical Data............................................................................................................. 21
4.1 General Information.............................................................................................................................. 21
4.2 Voltage Supply...................................................................................................................................... 21
4.3 Ambient Conditions............................................................................................................................... 22
4.4 Standards............................................................................................................................................. 22
4.4.1 Used Standards................................................................................................................................. 22
4.4.2 CE Marking........................................................................................................................................ 23
Declaration of Conformity .............................................................................................................. 23
Note for the Machine Manufacturer................................................................................................ 24
4.4.3 UL/CSA Certified............................................................................................................................... 24
DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
Bosch Rexroth AG I/81
Table of Contents
To Next Page
Loading...
Need help?
General