Bosch rexroth MSK Series - Page 42

1
2
3
4
1
① Screw connection M20 x 1.5 plastics (encoder)
② Screw connection M32 x 1.5 plastics (power cable 2.5 ... 10.0
mm²)
③ Screw connection M40 x 1.5 plastics (power cable 16.0 mm²)
④ Extension M32 / M40 plastics (power cable 16.0 mm²)
Fig. 6-6: Select screw connections
1
2
3
4
5
6
① Shield connection encoder cable
② Clamp terminal encoder 8 pole
③ Clamp terminal brake/temperature 2 pole
④ Power connection U, V, W (max. 16.00 mm²)
⑤ Shield connection power cable M4 x 10
⑥ Protective conductor power cable M8 x 12
Fig. 6-7: Connection points power and encoder cables
Connection diagram
The connection diagram represents a possible connection. Ob‐
serve the valid installation regulations at the installation site of the
machine.
28/57
Assembly
MSK Synchronous Servomotors
Bosch Rexroth AG R911325169_Edition 03