62/73 Bosch Rexroth AG R911345359 | WSC60GK/HA/ST
General notes for property damages and product damages
3.5 Maintenance and repair
Plugging or unplugging modules or connectors/terminals into/fromlive systems
Possibility of damage to the electrical equipment, unexpected
plant reactions!
Unless described otherwise, never unplug or plug any connectors/
terminals on live systems.
NOTIC
Electrostatic charge
Possibility of damage to the electrical equipment!
Observe all precautions for ESD protection when handling modules
and components and avoid electrostatic discharge.
Observe the following protective measures for modules and
components sensitive to electrostatic discharge (ESD):
Personnel responsible for storage, transport, and handling
must have training in ESD protection.
ESD-sensitive components must be stored and transported in
the prescribed protective packaging.
ESD-sensitive components may generally only be handled at
special ESD workplaces.
Personnel, working surfaces, as well as all equipment and
tools which may come into contact with ESD-sensitive
components must have the same potential (e.g. by grounding).
Wear an approved grounding bracelet. The grounding bracelet
must be connected with the working surface through a cable
with an integrated 1 megaohm resistor.
ESD-sensitive components may by no means come into contact
with chargeable objects, including most plastic materials.
When inserting or removing ESD in/from other devices, the device
must be safely disconnected from the supply.
To Next Page
Loading...
