What to do if there is no reaction at the output in Bosch API-AMC2-16IOE Industrial Electrical?
If your Bosch Industrial Electrical system shows no reaction at the output, which means the door opener or signal isn't activated, check the controller's display to ensure the signal is set. Also, verify the configuration settings within the AMS or ACE system.
What to do if there is no response from input in Bosch API-AMC2-16IOE Industrial Electrical?
If you're experiencing no response from an input in your Bosch Industrial Electrical system, likely there's no feedback from the inputs. Check the controller's display to ensure the signal is set when the input is short-circuited. Verify the controller's configuration, and if needed, reset the controller to Factory Default to clear all configuration data. You can also reset the controller as described in Resetting the software.
General| Brand | Bosch |
|---|---|
| Model | API-AMC2-16IOE |
| Category | Industrial Electrical |
| Language | English |
Provides essential safety warnings, cautions, and notices for device installation and operation.
Details the device's compliance with FCC Class B regulations for radio frequency emissions.
Provides a brief overview of the AMC2 extension's capabilities and supported systems.
Explains the AMC2-16IOE extension, its 16 analog inputs, and 16 relay outputs.
Key notices regarding the extension's lack of display and input/output parameterization.
Identifies and explains the function of the device's interfaces and internal jumpers.
Illustrates how the extension connects to the controller via RS-485 and the overall system setup.
Step-by-step instructions for securely mounting the AMC2 device onto a standard 35mm DIN rail.
Procedure for safely detaching the AMC2 device from its DIN rail mounting.
Instructions for safely opening the extension module's protective plastic housing.
Guidance on closing the enclosure and avoiding damage during the process.
Recommendations for cable selection and routing to prevent interference and ensure reliable operation.
Calculations and guidelines for choosing appropriate cables to avoid significant voltage drops.
Essential procedures for grounding and shielding wires for electromagnetic compatibility.
Details the function and setting of the ground jumper for the RS-485 extension interface.
Instructions for connecting an external power source directly to the extension module.
Explanation of the PSU's self-test function, battery status checks, and related signals.
Overview of power source options and typical power consumption for various system setups.
Details the RS-485 interface and how to connect extension modules to the controller.
Instructions for configuring the device address using the onboard DIP switches for system recognition.
Guides on wiring and configuring the 16 relay outputs for various applications.
Key specifications and precautions for connecting loads to the relay outputs to prevent damage.
Instructions for wiring the 16 analog inputs to sensors and other input devices.
Details on resistor values and cable resistance limits for accurate analog input readings.
Information on interfacing external tamper contacts with the extension module.
Specifies system and host computer requirements for UL-certified installations.
Explains the various security levels as defined by the UL 294 standard.
Detailed installation instructions and restrictions for achieving UL certification.
Provides detailed technical data including RS-485 extension capabilities and power consumption.
Identifies common problems, their causes, and solutions for the extension module.
Details on warranty, conditions requiring service, safety checks, and after-sales support.
Instructions for proper disposal of the device and ensuring data security.
Physical dimensions, material, weight, operating temperature, and humidity ratings.
Number of inputs/outputs, interface type, input voltage, and power consumption.
Visual schematics and pin assignments for all connectors on the AMC2-16IOE.
Detailed tables for analog inputs, relay outputs, and module bus pin configurations.
Access points for support services, documentation, training courses, and video tutorials.
To Next Page
