Bosch API-AMC2-16IOE User Manual

Extension board with 16-input 16-output Introduction | en 7
Bosch Security Systems B.V.
Installation manual
2024-01 | V02 |
3 Introduction
3.1 Description
The extension AMC2-16IOE can be used with a controller. It allows to extend a controller
with additional input and output ports.
Figure3.1: The extension AMC2-16IOE
The API-AMC2-16IOE has 16 analog inputs and 16 relay outputs.
The analog inputs can be wired with potential-free contacts, such as door or relay contacts.
The relay outputs can be actively connected with the internal voltage, as well as used
potential free.
The extension electronics are completely covered by a plastic housing.
i
Notice!
The extension has no display. The information about the inputs and outputs will be shown
on special pages of the connected controller display.
i
Notice!
The inputs and outputs can only be parameterized for passages or functions on the
controller connected to the extension. The inputs and outputs cannot be used for other
controllers across the network.

Bosch API-AMC2-16IOE Specifications

General

Brand	Bosch
Model	API-AMC2-16IOE
Category	Industrial Electrical
Language	English