47 54898 Should the bit become bound or
jammed in the work, the reaction torque of
the tool could crush your hand or leg.
4 349 897.0* 9-* '.9 <.9- & -&3)-*1)
-&22*7 47 81*),*-&22*7 <-*3
&99*259.3, 94 ).814),* & '4:3) 47
/&22*)'.9 Fragments of metal from the bit
could dislodge and strike you or bystanders.
*;*751&(*9-*9441)4<3:39.19-*'.947
&((*8847>-&8(42*94&(4251*9*8945
4 349 :8* ):11 47 )&2&,*) '.98 &3)
&((*8847.*8 Dull or damaged bits have a
greater tendency to bind in the workpiece.
"-*37*24;.3,9-*'.9+7429-*9441&;4.)
(439&(9 <.9- 80.3 &3) :8* 5745*7
5749*(9.;*,14;*8<-*3,7&85.3,9-*'.947
&((*8847> Accessories may be hot after
prolonged use.
4 349 7:3 9-* 9441 <-.1* (&77>.3, .9 &9
>4:7 8.)* A spinning bit could become
entangled with clothing and injury may result.
-4-
)).9.43&1&+*9>"&73.3,8
GFCI and personal protection devices like
electrician’s rubber gloves and footwear will
further enhance your personal safety.
4 349 :8* 431>7&9*) 94418<.9- &
54<*78:551> While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
**5 -&3)1*8 )7> (1*&3 &3)+7**+7424.1
&3) ,7*&8* Slippery hands cannot safely
control the power tool.
*;*145 &5*7.4).( 2&.39*3&3(*8(-*):1*
+47 >4:7 9441 "-*3 (1*&3.3, & 9441 '*
(&7*+:134994 ).8&88*2'1*&3> 5479.434+
9-* 9441 8.3(* .39*73&1 <.7*8 2&> '*
2.851&(*)475.3(-*)478&+*9>,:&7)7*9:73
857.3,8 2&> '* .25745*71> 24:39*)
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Risk of injury to user. The power cord must only
be serviced by a Bosch Factory Service Center
or Autho rized Bosch Service Station.
42*):89(7*&9*)'>54<*7
8&3).3,8&<.3, ,7.3).3,
)7.11.3, &3) 49-*7 (43897:(9.43 &(9.;.9.*8
(439&.38(-*2.(&18034<394(&:8*(&3(*7
'.79- )*+*(98 47 49-*7 7*574):(9.;* -&72
42**=&251*84+9-*8*(-*2.(&18&7*
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
!
WARNING
To Next Page
Loading...
