Bosch Security Systems User Manual

17
AlarmsAlarms
AlarmsAlarms
Alarms
FF
FF
F
irir
irir
ir
e Alare Alar
e Alare Alar
e Alar
msms
msms
ms
Fire alarms are the highest priority events. When a fire
point activates, the control center emits a pulsating
high-pitched fire tone. Evacuate all occupants and
investigate for smoke or fire. Ensure that all occupants
know the difference between the burglary tone and the
fire tone. The tone sounds for the time set by your
security company.
The display shows the point text of the first point that
went into fire alarm. Press the
NEXT NEXT
NEXT NEXT
NEXT key to manually
display additional points (if any) that went into alarm.
Events scroll from the oldest to the newest.
Silencing Fire AlarmsSilencing Fire Alarms
Silencing Fire AlarmsSilencing Fire Alarms
Silencing Fire Alarms
Entering a personal passcode with the proper authority
level silences a fire alarm and disarms the system if it
is armed. The system now displays
ALARM SILENCEDALARM SILENCED
ALARM SILENCEDALARM SILENCED
ALARM SILENCED
and then the number of points in alarm (
A1 ## FIREA1 ## FIRE
A1 ## FIREA1 ## FIRE
A1 ## FIRE
ALARMALARM
ALARMALARM
ALARM) and the custom text of all the points in alarm,
in the order of occurrence. The system can be
programmed so that some fire alarms cannot be
silenced until the fire event clears. Entering COMMAND
4 clears the scrolling point text from the display. The
ALARM SILENCED ALARM SILENCED
ALARM SILENCED ALARM SILENCED
ALARM SILENCED message continues to scroll as a
reminder that it is still possible to view the text of the
points in alarm by using the View Memory function.
See
VIEW MEMORY ?VIEW MEMORY ?
VIEW MEMORY ?VIEW MEMORY ?
VIEW MEMORY ? (COMMAND 40) for more
information. To clear the event memory and remove
the
ALARM SILENCED ALARM SILENCED
ALARM SILENCED ALARM SILENCED
ALARM SILENCED message from the display, enter
a valid passcode and press the
ESCESC
ESCESC
ESC key, or re-arm the
area.
If a fire trouble still exists, the display shows
FIREFIRE
FIREFIRE
FIRE
TROUBLETROUBLE
TROUBLETROUBLE
TROUBLE. To remove this display, the fire point(s)
must be returned to normal. If you wish to review
cleared events, use COMMAND 4 0.

Bosch Security Systems Specifications

General

Brand	Bosch
Model	Security Systems
Category	Security System
Language	English