20
If the system is armed, the display shows the number
of non-fire trouble (
A1 ## TROUBLES A1 ## TROUBLES
A1 ## TROUBLES A1 ## TROUBLES
A1 ## TROUBLES ) and then
custom text for each activated point.
Silencing Non-Fire Trouble EventsSilencing Non-Fire Trouble Events
Silencing Non-Fire Trouble EventsSilencing Non-Fire Trouble Events
Silencing Non-Fire Trouble Events
Entering a personal passcode with the proper authority
level silences a trouble and disarms the panel if it is
armed. If you wish to clear the scrolling trouble
message from the display, enter COMMAND 4. If you
wish to review these cleared troubles, use COMMAND
40.
Viewing Non-Fire Trouble EventsViewing Non-Fire Trouble Events
Viewing Non-Fire Trouble EventsViewing Non-Fire Trouble Events
Viewing Non-Fire Trouble Events
After a passcode is entered, the text of the activated
points continues to scroll through the display. Press
NEXTNEXT
NEXTNEXT
NEXT to scroll displays manually. Events scroll from
oldest to newest. Use COMMAND 4 to clear messages
from the display.
Special SySpecial Sy
Special SySpecial Sy
Special Sy
ss
ss
s
tt
tt
t
em Tem T
em Tem T
em T
rr
rr
r
ouble Displaouble Displa
ouble Displaouble Displa
ouble Displa
yy
yy
y
SERVC AC FAIL SERVC AC FAIL
SERVC AC FAIL SERVC AC FAIL
SERVC AC FAIL and
SERVC BATT LOW SERVC BATT LOW
SERVC BATT LOW SERVC BATT LOW
SERVC BATT LOW are examples
of system trouble displays. These displays appear on
all keypads in the system. All system trouble displays
begin with
SERVCSERVC
SERVCSERVC
SERVC. See Standard Displays for a
description of each system trouble display. Entering
your passcode or a COMMAND 4 silences a system
trouble tone, but the SERVC display does not clear until
the faulted condition is corrected.
Cleared Events Are Not LostCleared Events Are Not Lost
Cleared Events Are Not LostCleared Events Are Not Lost
Cleared Events Are Not Lost
If you clear the alarms and troubles from the display,
you can still view all the events that occurred since
thelast time the system was armed by using COMMAND
40 (View Event Memory).
Entry Delay Tone and DisplayEntry Delay Tone and Display
Entry Delay Tone and DisplayEntry Delay Tone and Display
Entry Delay Tone and Display
When you enter an armed system through a point
programmed for entry delay, the command center emits
a repeating tweedle tone and displays
DISARM NOWDISARM NOW
DISARM NOWDISARM NOW
DISARM NOW
as a reminder to turn off the security system.
Failure to turn off the security system before the entry
delay time expires may sound the burglary tone and
could result in an alarm report being sent to the
security company.
To Next Page
Loading...
Need help?
General
