8
B O S C H
* Model dependent
☞
Tip: To prolong the optimum steam
function, you may mix tap water with
distilled water 1:1. If the tap water in
your district is very hard, mix tap water
with distilled water 1:2.
You can inquire about the water
hardness with your local water supplier.
2. Setting the temperature
The temperature control (12) adjusts the
temperature of the soleplate (7).
Set the temperature control to the
corresponding position by lining it up with
the temperature index (9) on the iron.
Temperature Suitable for :
2.1 “TempOK” indicator
While the soleplate is heating up or cooling
down to the selected temperature, the
“TempOK” lights inside the temperature
control (12) will ash. When the selected
temperature is reached, the lights will stop
ashing and remain lit continuously.
2.2 “i-Temp” function*
If this function is selected, an appropriate
temperature is set which is suitable for all
fabrics that can be ironed.
The “i-Temp” function prevents clothes from
becoming damaged due to an unsuitable
temperature being selected.
The “i-Temp” function does not apply to
fabrics that cannot be ironed. Please
check the garment care label for details or
try ironing on a part of the fabric not visible
normally.
When the “i-Temp” function is selected, the
blue light inside the temperature control
comes on.
To Next Page
Loading...
