6
B O S C H
3. Setting the temperature
Set the temperature control (13) to the corresponding
position by lining it up with the temperature index (12) on
the iron.
●● silk – wool
●●● cotton
max linen
Tip: Start by ironing the fabrics that require the lowest
ironing temperature. Check the recommended ironing
temperature on the label on the garment.
“i-Temp” programme
This programme sets an appropriate combination of
temperature and steam, which is suitable for all fabrics
that can be ironed (symbols ).
The “i-Temp” programme does not apply to fabrics that
cannot be ironed (symbol
).
Please check the garment care label for details or try
ironing on a part of the fabric not visible normally.
AntiShine
“AntiShine” programme *
Suitable for dark and delicate fabrics. Reduces the risk of
shiny marks when ironing.
Tip: Try to iron the fabrics while they are still damp after
washing. Steam will be generated from the fabrics rather
than the iron.
Hygienic
“Hygienic” programme *
Suitable for all kinds of fabrics and extremely efcient in
both thick and delicate garments.
The unique combination of temperature and interval
steam provides a sanitizing effect requiring no chemical
additives.
Tip: To ensure the maximum efciency of the “Hygienic”
programme, it is recommended to set the steam mode to
“max” (see section 5).
* Model dependent
To Next Page
Loading...
