4.7.1 Water inlet valve
Ascenta dishwashers use standard horizontal coil water inlet
valve with (Rast 5) connector. The valve nestles in the left side of
the base on base tabs and is held into place with two screws.
4.8 Door spring
The door spring mechanism is simple, requiring no pulleys or
cords. A long narrow spring connects between the base and
hinge lever (using a plastic connector) to provide proper tension.
The spring has loops at both ends and connects to a long slot in
the base. Springs are color coded for specific tensions.
4.9 Terminal box
All dishwashers have terminal boxes with covers and conduit
exits.
4.9.1 Terminal block
Terminal blocks clearly show line (L), neutral (N) & ground (G)
connections. Dishwasher wire harnesses have spade terminals
which connect to terminals on the rear of the terminal block.
Terminal blocks can’t be installed in the field – the terminal box
assy with terminal block must be ordered. The terminal box assy
assures the terminal block is properly grounded to the terminal
box.
702_58300000130262_ara_en_c Page 15 of 50
To Next Page
Loading...
