Bosch SHP9PCM5N - Remote Start; Remote Diagnostics; Software Update; Data Protection

HomeConnect® en-us
25
15.1 HomeConnect® quick start
Connect your appliance to a mobile device quickly and
easily.
Setting up the HomeConnect® app
1. Install the HomeConnect® app on your mobile device.
1
2. Start the HomeConnect® app and set up access for
HomeConnect®.
The HomeConnect® app guides you through the entire
registration process.
Setting upHomeConnect®
Requirements
¡ The HomeConnect®app is installed on your mobile
device.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
¡ The appliance door is closed.
1. Open the HomeConnect® app and scan the following
QR code.
2. Follow the instructions in the HomeConnect® app.
15.2 HomeConnect® settings
Adapt HomeConnect® to your needs.
You can find the HomeConnect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether HomeConnect® has been
set up and whether the appliance is connected to your
home network.
15.3 Remote Start
You can use the HomeConnect® app to start the
appliance with your mobile device.
Tip:If you select "rc:02" in the Basic settings → Page24
of this function, the function is permanently activated, and
you can start your appliance with a mobile device at any
time.
Activating Remote Start
When you have selected "rc:01" in the basic settings of
this function, activate the function on your appliance.
Requirements
¡ The appliance is connected to your WLAN home
network.
¡ The appliance is connected to the HomeConnect® app.
¡ "rc:01" is selected in the Basic settings → Page24 of
this function.
¡ A program is selected.
▶ Press ⁠.
If you open the appliance door, the function is
automatically deactivated.
a button lights up.
Tip:To deactivate the function, press ⁠.
15.4 Remote Diagnostics
The Customer Service can access your appliance via
Remote Diagnostics if you ask them to do so, if your
appliance is connected to the HomeConnect® server and
if Remote Diagnostics is available in the country where
you are using the appliance.
Tip:Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com.
15.5 Software update
You can use this function to update the software of your
appliance, e.g. for optimization, troubleshooting or safety-
relevant updates.
The HomeConnect® app informs you about available
software updates.
15.6 Data Protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the HomeConnect®
server (initial registration):
¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
1
Apple App Store und the Apple App Store logo are trademarks of Apple Inc. Google Play and the Google Play logo are
trademarks of Google LLC.