Bosch SHP9PCM5N - Cleaning Spray Arms

Cleaning and maintenance en-us
27
4. Pull down the micro filter to remove.
5. Press the locking catches together and lift the coarse
filter out .
1
2
6. Clean the filter elements under running water.
Carefully clean the rim of dirt between the coarse and
fine filter.
7. Reassemble the filter system.
Make sure that the locking catches on the coarse filter
click into position.
8. Insert the filter system into the appliance and turn the
coarse filter clockwise.
Make sure that the arrow markings match up.
9. The spray arm will automatically return to the correct
position when starting, so it’s not necessary to
reposition the spray arm to the front.
16.5 Cleaning spray arms
Limescale and debris in the dishwashing water may block
the nozzles and bearings on the spray arms. Clean the
spray arms regularly.
1. Unscrew the upper spray arm and pull down to
remove ⁠.
1
2
2. Check that the lower spray arm is at the 6 o'clock
position.