Familiarizing yourself with your appliance en-us
9
Button If you press for approx. 3 seconds, you can open the
basic settings.
→
"Changing the basic settings", Page24
ON/OFF button and reset button Switching on the appliance
Switching off the appliance
Terminating the wash cycle →
Page21
Cycle buttons
Cycles →
Page10
Special salt refill indicator Water softening system
Rinse aid refill indicator Rinse aid system
→
"Adding rinse aid", Page16
WLAN display
Home Connect →
Page24
Water supply display Display for water supply
Cycle buttons and options
Cycles →
Page10
Options →
Page11
Start button
Starting the wash cycle →
Page21
Display While the cycle is running, status information on the delay
time, the cycle or the time remaining appears on the
display.
Display The display shows information about the remaining run
time or basic settings. You can change the basic settings
via the display and the setting buttons.
→
"Changing the basic settings", Page24
Remote Start
→
"Remote Start ", Page25