NL Basic settings
BB
asis settings
asis settings
BYOU
asis settings
can set up your device according to your needs.
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting
water hardness
Display text
H041
Choise
H00 - H07
Description
Set the water softener to the water
hardness.
"Set water softening",
page 25
At position H00 the water
softening is switched off.
rinse aid
lilac
r051 r00 - r06 Set the amount of rinse aid.
"Setting the rinse aid
amount", Page 28
Switch off the rinse system
with position r00.
Intensive drying d001 d00 - d01 When rinsing, the temperature is
increased, which results in better
drying results. As a result, the
running time may increase slightly.
NoteNot suitable for
delicate items of crockery.
Switch on intensive drying "d01"
or switch off "d00".
hot water A001 A00 - A01 Set cold water connection or hot
water connection. Only set the device
to Hot water if the hot water is
prepared in an energy-efficient
manner and if a suitable installation is
available, e.g. a solar cylinder with a
circulation line. The water
temperature must be a minimum of
40 °C and a maximum of 60 °C.
Switch on hot water "A01" or
switch off "A00".
WiFi Cn01 Cn0 - Cn1 Enable or disable wireless network
connection.
The "Cn0" position disables the
wireless network connection.
1
Factory setting (may differ depending on the device type)
36
To Next Page
Loading...
