NLTroubleshooting
Display instructions
Malfunction Cause To fix an issue
Refill softening salt
indicator lights up.
There is no softening
salt.
▶
Fill in "softening salt"→Page 25 Bee.
Sensor does not recognize
softening salt tablets.
▶
Do not use softening salt
tablets.
Refill softening salt indicator
does not light up.
Water softening is
switched off.
▶
Set water softening
Rinse aid refill
indicator lights up.
Rinse aid is missing. 1.Fill the "rinse agent"
→Page 27Bee.
2.Set the amount of rinse aid.
"Setting the rinse aid
amount", Page 28
Rinse aid refill indicator
does not light up.
Water softening is
switched off.
▶
Set the amount of rinse
aid.
Display flashes. Appliance door is not
completely closed.
▶
Close the appliance door.
† Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
Malfunctions
Malfunction Cause To fix an issue
Water remains in the
appliance at the end of the
programme.
Sieve system or space under
the sieve is clogged.
1.Clean the "seven"→Page 42.
2.Clean the "drain pump"
→Page 57.
Program has not yet
ended.
▶
Wait for the end of the program or
cancel the program withReset off.
▶
"Cancel program",
page 35
Device cannot be
switched on or operated.
Software update in
progress.
▶
Wait for the software update to
complete.
Device functions
have failed.
1.Unplug the appliance from
the mains or switch off the
fuse.
2.Wait at least 2 minutes.
54
To Next Page
Loading...
