NLTroubleshooting
Malfunction Cause To fix an issue
Another error code
appears in the indicator
window.
There is a technical
malfunction.
1.Press .
2.Unplug the appliance from
the mains or switch off the
fuse.
E:01-00 to E:90-10
3.Wait at least 2 minutes.
4.Plug the appliance into a
mains socket or switch on
the fuse.
5.Turn on the device.
6.If the problem occurs
again:
† Press .
† Close the tap.
† Remove the plug from the
socket.
† Contact the "service
department"
→Page 59and state the
error code.
Washing result
Malfunction
Crockery is not dry.
Cause To fix an issue
No rinse aid has been
used or the dosage is
set too low.
1. Fill the "rinse agent"
→Page 27Bee.
2.Set the amount of rinse aid.
"Setting the rinse aid
amount", Page 28
The program or program option
has no drying phase or a drying
phase that is too short.
▶
†Select a program with drying, e.g.
Intensive, Strong or ECO
programme."→Page 19
The drying result is reduced with
some option buttons, eg
Variospeed.
Water remains in cavities
of crockery and cutlery
to stand.
▶
Arrange the crockery as diagonally as
possible.
46
To Next Page
Loading...
