TroubleshootingNL
Malfunction Cause To fix an issue
5.Remove the strainer from the inlet hoseE:32-00 lights up alternately
or water supply indicator
lights up.
6.Clean the strainer.
7.Place the strainer in the supply hose.
8.Screw on the water connection.
9.Check the water connection for
leaks.
10.Put the plug back in the
socket.
11.Turn on the device.
E:92-40 lights up alternately. Strainers are dirty or clogged.
▶
Clean the sieves.
"Cleaning sieves", Page 42
E:61-03 lights up alternately.
The water is not pumped
out.
Drain hose is clogged or
kinked.
1.Route the drain hose without
kinks.
2.Remove the remains.
Siphon connection is still closed.
▶
Check the connection to the
siphon and open it if necessary.
Drain pump cover is
loose.
▶
Make the cover of the "drain
pump"→Page 57well fixed.
E:61-02 lights up alternately. Drain pump is blocked.
▶
Clean the drain pump.
"Cleaning the drain
pump", page 57
Drain pump cover is
loose
▶
Make the cover of the "drain
pump"→Page 57well fixed.
E:90-01 lights up alternately. Mains voltage is too low. There is no error in the device.
1.Contact an electrician.
2.Have the mains voltage and electrical
installation checked by the
electrician.
45
To Next Page
Loading...
