NLTroubleshooting
Malfunction Cause To fix an issue
Food residue on the
crockery.
Crockery is placed too close
together or the basket is
too full.
1. Arrange the crockery with sufficient
space in between.
The spray jets must be able to
reach the surface of the
dishes.
2.Avoid touch points.
Spray arms cannot
rotate freely.
▶
Arrange the dishes in such a way
that the dishes do not hinder the
rotation of the spray arm.
Spray arm nozzles are
clogged.
▶
Clean the "spray arms"
→Page 43.
The seven are polluted.
▶
Clean the sieves.
"Cleaning sieves", Page 42
The strainers are incorrectly
fitted and/or not secured.
1. Apply the sieves properly.
"Sieving System", Page 42
2.Secure the seven.
Washing program too weak
chosen.
▶
Select a more powerful rinse
programme.
"Programs", Page 19
Crockery has been pre-
cleaned too well. The sensor
system therefore opts for a
weak washing program.
Stubborn dirt cannot
be partially removed.
▶
Only remove coarse food residues
and do not pre-rinse the dishes.
Tall, narrow pieces of
crockery are insufficiently
spread out in the corners.
flushed.
▶
Do not arrange tall, narrow pieces
of crockery at an angle or in the
corners.
Upper basket is not set
to the same height on
the right and left.
▶
Set the upper basket on the left and
right to the same height.
"Upper basket", page
21
48
To Next Page
Loading...
