Setting up and connectingde
2.Connect the device to the drinking
water connection using the
included parts.
Observe the technical data.
3.Make sure that the drinking water
connection is not kinked, crushed or
twisted.
4.5 Electrical connection
Connect the device electrically
Hints
¡Observe the safety instructions
wise →
page 4
.
¡Please note that the water
Safety system only works when
there is power supply.
1.Insert the cold appliance plug of the
mains connection cable into the
device.
2.Plug the power plug of the device's
power cord into a socket near the
device.
The connection data of the
device is on the nameplate.
3.Check that the power plug is firmly
seated.
13
To Next Page
Loading...
