deservice
14.6 Activate key lock
aThe program is aborted
and is completed after approx. 1
minute.
The key lock prevents the device
from being used undesirably or
improperly during operation.
14.10 Switch off the device
1.The instructions for safe use →
Page 10
observe.
▶ Press for approx. 3 seconds.
aThe key lock is activated and
is automatically deactivated
when the program ends.
aWhen the device is operated,
flashes in the display.
aIn the event of a power failure, it remains
Key lock activated.
2. press.
Tip:If you press during the rinse cycle,
the current program will be
interrupted. When you turn on the
device, the program continues
automatically.
14.7 Deactivate key lock
▶ Press for approx. 3 seconds.
14.8 Interrupt program
A notice:If you open the appliance door
when the appliance is heated up, leave the
appliance door ajar for a few minutes and
then close it. This will prevent excess
pressure from building up in the device
and causing the device door to pop open.
1. press.
aThe program is saved
and the device switches off.
2.To continue the program, press .
14.9 Cancel program
To end a program prematurely or to
change a program that has been
started, you must cancel it.
approx. 4 seconds▶
press.
aAll indicators light up.
aOnce the ads are out,
The display shows “0h:01m” and the
remaining water is pumped out.
36
To Next Page
Loading...
