Cleaning and carede
17.6 Clean spray arms
2.Pull the lower spray arm upwards.
Limescale and impurities from the
rinsing water can block the spray arm
nozzles and bearings. Clean the spray
arms regularly.
1.Unscrew the upper spray arm and
pull it down.
3.Check the outlet nozzles of the spray
arms for blockages under running
water and remove any foreign
bodies.
1
4.Insert the lower spray arm. aThe
spray arm audibly clicks into place.
2
5.Insert the upper spray arm and
screw tight.
45
To Next Page
Loading...
