22
Bosch Security Systems 09/07 BLCC500R FTR1.02
Copyright © 2007 E&OE
FDEF ?
Figure 29: Factory Default Display
You can disable factory defaulting using MENU 7-7-
4. If factory defaulting has been disabled you must
know the installer code to perform a factory default
otherwise the system will need to be returned to
your supplier for defaulting or you can purchase a
CM255 Default Unlock Key which will unlock the
panel in the field. Charges apply for defaulting if
retuned to the distributor.
Table 14: Domestic Dialing Defaults Settings
01nSAn
Figure 30: Zone Array Showing Z1 to Z4
09-nST
Figure 31: Zone Array Showing Z9 to Z12
Table 15: Basic Reporting Code Reference Listing
To Next Page
Loading...
