27
Bosch Security Systems 09/07 BLCC500R FTR1.02
Copyright © 2007 E&OE
Table 17: User Default Programming Options
Access > Commands >
Erase User
MENU 1-0-0
Access > PIN Codes >
Change Own PIN
MENU 1-1-0
Change Other PIN
MENU 1-1-1
Add PIN
MENU 1-1-2
Delete PIN
MENU 1-1-3
View PIN
MENU 1-1-4
Access > Token >
Add Token
MENU 1-2-0
Delete Token
MENU 1-2-1
Token Status
MENU 1-2-2
Access > RF Keyfob >
Add Keyfob
MENU 1-3-0
Delete Keyfob
MENU 1-3-1
Test Keyfob
MENU 1-3-2
Access > User Properties >
User Name
MENU 1-4-0
U s e r 1 N a m e
Use [] and [] Keys To Scroll the Cursor Left and Right. Use Keys [0]
– [9] + [] and [] To Select Characters. When finished press [OK] To
Save. Press [OFF] To Clear From The Current Cursor Position.
Access > Global Properties >
Area Assignment MENU 1-4-1
1 Area 1 Y
2 Area 2 N
3 Area 3 N
4 Area 4 N
Access > User Properties >
User Option
MENU 1-4-2
1 Has Master Code Privileges Y
2 Expire PIN Code N
3 Is Arm Only Code N
4 Can Bypass Zones Y
5 Can Auto Bypass Zones Y
6 Always Send Open / Close Reports Y
7 Reserved N
8 Reserved N
This location is a Bit option field. Press Keys [1] – [8] to turn ON and
OFF the required options. The option is selected or ON when the
coresponding zone indicator is on. Press [OK] To Save when finished.
Access > User Properties >
Timer Group
MENU 1-4-4
0
Enter 1 - 8 + [OK] To Assign The User To A Timer Group – Can Only
Be Assigned To One Timer Group (0 = No Timer Group)
Access > User Properties >
Access Assignment MENU 1-4-5
1 Access Group 1 N
2 Access Group 2 N
3 Access Group 3 N
4 Access Group 4 N
5 Access Group 5 N
6 Access Group 6 N
7 Access Group 7 N
8 Access Group 8 N
Multiple Groups Can Be Assigned To Each User. Press keys [1] – [8] To
Toggle Groups On/Off, Then Press [OK] To Save.
To Next Page
Loading...
Need help?
General
