Working Advice
The material removal rate and surface quality are primarily determined by the choice of abrasive tool, the pre-
selected speed setting and the contact pressure.
Only immaculate abrasive tools will deliver good grinding performance and protect the power tool.
Use only original Bosch-sanding accessories.
Preselecting the speed
You can preselect the required speed using the thumbwheel for speed preselection (7), even during operation.
If the final setting of “6” is reached, the thumbwheel audibly engages.
1 − 2 low speed
3 − 4 medium speed
5 − 6 high speed
To Next Page
Loading...
