Troubleshootin
TO AVOID
RISK OF ELECTRIC SHOCK!
Repairs should only be carried out
by an authorized technician.
of Minor Faults
If repairs are necessary, and you
cannot eliminate the fault yourself with
the aid of the table below, follow these
steps:
1,
2.
3,
4.
Turn the cycle selector to Off.
Disconnect the washing machine
from the power outlet.
Turn off the water faucets.
Call Customer Service
(referto Page 31).
Troubleshooting items listed below may
not be covered by warranty service!
Please carefully rule out any of these
issues before calling for service.
Fault Possible cause Action
Cycledurationextended. Thisis notafault. Adda moreappropriateamountof detergent.
Thesudsdetectionfeaturehasactivatedanadditional
rinsingcycleto reducethe amountof suds.
Thisis notafault.
Theunbalancecompensationsystemis attemptingto
balancethe loadthroughrepeatedspins.
Thisis not afault.
Thelaundryloadmaybe large,requiringmoretime.
Powerfailure.Thedoorcannotbe
opened.
Doorcannotbe opened,
eventhoughtheappliance
hasbeenswitchedoff and
on again.
Contmllightsdo notlight
up,
Cycledoesnot start.
Start/Pauseindicatorlight
flashes.
Cycledoesnotstart.
Indicatorlight "Finished"is
lit anddisplayis flashing
"E:01"
Cycledoesnot start."Real
Timedelay"is indicatedin
thedisplayfield.
Spinspeedcannotbe
selected.
Detergentresiduein the
detergentdispenser.
Cycleis runningand/orthe dooris lockedfor safety
reasons.
Plugis looseor notinserted.
Cycleselectorturnedto Off beforeendof cycle.
Forsafetyreasonsthedoorhas beenlockedbecausethe
waterlevel,temperatureor highdrumspeed.
Alwaysloadthe drumwith largeand smallitems
together.
Allowadditionalwashingtime for largerloads.
An interruptedcyclewill beresumedwhenpoweris
restored.If the laundryis to be removedduringa power
failure,call CustomerService(referto Page31).
Waituntilthe cycleends (seePage26).
Eliminatethecause,
Selecta cycle,
See"Addingtothe laundry/Interruptingthe cycle",Page
26,
A fusehasblown.
Powerfailure.
Start/Pausebuttonnotpressed.
Resetcircuitbreaker.
CallCustomerServiceif thisfault recurs.
An interruptedcyclewill beresumedwhenpoweris
restored.If the laundryis to beremovedduringa power
failure,call CustomerService (seepage31).
PresstheStart/Pausebutton.
Doornotclosedproperly. Checkwhetherlaundryis trappedin door.
Closethedoor(aclick shouldbe heard).
cyclecontinues.
Endtime selectedandactivated. None. Appliancestartsautomatically.
Spinningis alreadyin progress;duringspin cyclethe Selectspeedbeforespinning.
speedcannotbechanged.
Detergentwasdampor lumpy. Cleananddrythe detergentdispenser(seePage27).
Usethe capof the detergentbottleto measureliquid
detergents,
29