Parts and operating controls
Parts and operating controls
High-speed motor block
45000 revolutions per minute.
only provides particularly fast and fine
blending results but also makes it possible
to heat food. Using the Soup automatic
programme, for example, a hot soup can be
made from cold ingredients.
Note:max speed setting, the blender
Pulse
heating of food, process the ingredients for
on/off switch
Status display
a mark for the zero setting of the rotary
selector.
Display
Display lights up:
on and ready for use
Display flashes:
– fault in the appliance
– Blender jug is not correctly positioned
or has become detached
– Rotary selector not at zero setting
–
– longer than 5½ minutes of continuous
operation (manual mode)
Rotary selector
For continuous adjustment of the blender
knife speed.
Settings
Zero setting (mark points to the status
display) = standstill
min
max Highest speed
Caution!
after 5½ minutes of continuous operation at
the max speed setting, only use the max
speed setting for another 1-2 minutes at
the most after turning the machine back on.
and damage the container.
Notes:
–
become detached, or if the electricity
rotary selector first to the zero setting
and then continue.
–
affect the use of the Pulse function.
Pulse button
Pulse button is
pressed.
Note:
automatic programme is running.
Programme selection buttons
with LEDs
For selecting and starting automatic
programmes. X
automatically.
Blender jug
taste or smell.
Caution!
Do not expose the blender jug to
temperatures above 80°C.
Lid with locking cap
liquid ingredients, turn the locking cap
To Next Page
Loading...
