7.
status LED lights up.
8. Process the ingredients until the desired
consistency is achieved.
Using the pusher
W Risk of injury!
X Fig. E
1.
direction and remove.
2. Place the pusher provided into the
opening.
3.
pusher along the corners and sides of
the blending jug.
4.
immediately. Put on the locking cap
direction.
Note: Using the pusher can considerably
improve the quality of the blending result.
Using the Pulse function
the Pulse
Pulse button is pressed, the
Release the Pulse
previously selected speed.
Note:
running, the Pulse function cannot be used.
Automatic programmes
programmes (depending on the model).
programme selected starts and processes
the ingredients at preset speeds and
automatically after preparation.
Programmes
Shake For fruit smoothies and
ingredients
Smoothie For green smoothies and
ingredients
Soup For preparing hot soups
Ice cream* For ice cream and sorbets
Sauce* For sauces and dips
Cleaning* Cleaning programme
*Depending on the model
Caution!
Soup
has finished, do not restart the Soup
up too much and damage the container.
Please note:
– Soup
automatic programme. If hot ingredients
are added, the temperature increases
too much.
–
zero setting.
–
at any time by repressing the relevant
programme selection button or by
An example
Making a pear smoothie
(recipe X)
X Fig. F
1. Place the base unit onto a stable and
pad on to the base unit, observing the
recess.
Important: Never attach the blender jug
2. Place the blender jug on to the cushion
pad. Make sure the blender jug is firmly
positioned on the appliance.
3. Put the desired ingredients into the
blender jug.
To Next Page
Loading...
