Bosch VOT-320-V019L - Adjusting the WFOV Lens

VOT-320 Installing and connecting | en 15
Bosch Sicherheitssysteme GmbH Quick Installation Guide F.01U.266.039 | V5.5 | 2012.03
4.9 Adjusting the WFOV lens
Cameras with 9 mm, 13 mm, and 19 mm lenses cover a wide
field of view (WFOV). You may need to adjust the focus. All
other lenses are preset and do not need to be adjusted.
– To check the image, connect a monitor to the BNC socket.
– Loosen the four fixing screws of the camera module.
– Lift the camera module and slide it backwards in order to
reach the lens.
– Attach the focussing tool to the lens and turn it to set the
focus.
– Remove the focussing tool.
– Lift the camera module and slide it back to the original
position.
– Refasten the four screws and disconnect the monitor.
– Close the cover of the housing, and secure the latches
using the tamper resistant screws and the provided torx
wrench.