16 en | Configuration VOT-320
F.01U.266.039 | V5.5 | 2012.03 Quick Installation Guide Bosch Sicherheitssysteme GmbH
5 Configuration
5.1 Assigning an IP address
– If you have not already done so, install the Bosch Video
Client program from the product CD.
– Start Bosch Video Client.
– Click to start Configuration Manager. The system
automatically searches the network for compatible units.
– When the VOT-320 is displayed in the list, the
Configuration Wizard starts automatically. If not, click
Configuration Wizard... on the Tools menu.
– Follow the instructions given in the Configuration Wizard
window.
NOTICE!
Before you can operate the VOT-320 within your network, it
must have a valid IP address for your network and a compatible
subnet mask.
To Next Page
Loading...
