de Basic operation
G 1comprehensive operation
3 basic
service
13.3 Adjusting the program
settings
Depending on the program and
program progress, you can adjust
the settings or activate and
deactivate them.
Basic operation
13.1 Switch on the device
▶ Turn the program selector to a program
set gram.
Note: Overview of all program
settings:
Pre-condition: A program is
set.
▶ Adjust the program settings
sen.
The program settings are not
saved permanently for the
program.
13.4 Loading laundry
Hints
13.2 Setting the program
¡ Note the information
on the subject of security →
page 4
and avoid property damage
→
Page 11,
to keep your device safe
need to be able to.
¡ To avoid creasing,
note the maximum load of the
program →
Page 26.
1. Turn the program selector to the
desired program →
Page 26
place.
Pre-condition: Prepare and sort the
laundry.
→
"Laundry", page 34
1. Open the door.
2. If necessary, adjust the program
settings →
Page 38.
2. Make sure the drum is empty.
38
To Next Page
Loading...
