Bosch WFMC3200UC - Page 56

2nd Edition/Revision 0 (4/28/04)
R020031E
WFMC/WFXD Service Tips
WFMC/WFXD Service Tips
–
–
Test Program (1D):
Test Program (1D):
Displaying Selected Tests
Displaying Selected Tests
56
/
All washers have displays showing what test has been selected.
WFMC64/WFXD84 Displays
P:03
WFMC32/WFXD52 Displays
Test # Test
WFMC32/
WFXD52 Displays
WFMC64/WFXD84
Displays
Generates
Fault Codes
1 Display fault codes P:01 P1:ERRORS No
2 Safety test (don't run) P:02 P2:SAFETY No
3 Automatic test program P:03 P3:AUTOM No
4 Motor P:04 P4:MOTOR Yes
5 Model coding (variations) - don't run P:05 P5:VARIANT No
6 Displays & lights P:06 P6:DISPLAY No
7 Selector knob P:07 P7:SELECTOR No
8 Analog water level sensor
Test not available
P8:NIVEAU1 Yes
9 Pressure switch P:09 P9:NIVEAU2 Yes
11 Flow meter
Test not available
P11:FLOW Yes
12 Update control programming (N/A) P:12 P12:UPDATE No
13 Water valve 1 P:13 P13:VALVE1 Yes
14 Buzzer P:14 P14:BUZZER No
15 Pump P:15 P15:PUMP Yes
16 Heater & NTC P:16 P16:HEATER Yes
17 Noise (factory test - don't run) P:17 P17:NOISE No
HINT: Skip tests
2, 5, 12 & 17.