Bosch Whyte E-180 - Declaration of Conformity

DECLARATION OF CONFORMITY
43
- UK DECLARATION OF CONFORMITY -
This declaration of conformity is issued under the sole responsibility of the manufacturer.
As the manufacturer we hereby declare that the following products:
MANUFACTURER
Company Name: Whyte Bikes Ltd.
Full Address: Whitworth Road, St Leonards on Sea
Postal Code: TN37 7PZ
Place: East Sussex
Country: United Kingdom
Product name: Electrically Power Assisted Cycles (EPAC Bicycle)
Commercial name: Suspension E-MTB
Function: Electric Mountain bike
Models: E-160, E-180, ELyte, E500
Article numbers:
WE160SV4, WE160RSV4, WE160RSXV2
WE180SV5, AWE180RSXV5, WE180WV2
WEL140RSXV1, WEL140WV1, WEL150RSV1,
WEL150RSXV1, WEL150WV1, WEL150SWV1
WE504V1, WE505V1, WE506V2
DESCRIPTION AND IDENTIFICATION
COMPLIANCE
The manufacturer declares that the above-mentioned machinery fulls all relevant provisions of
Machinery Directive 2006/42/EC; Radio Equipment Directive 2014/53/EU;
RoHS Directive 2011/65/EU and Amendment Directive (EU)2015/863
In conjunction with the following harmonised standards and where appropriate other
technical standards and specications for the design and manufacture
EN ISO 12100:2010; EN 15194:2017; EN 17404:2022; EN 301 489-1 V2.2.3
The applicable security requirements in Schedule 1 of the Product Security and Telecommunications Infrastructure (Security Requirements for Rele-
vant Connectable Products) Regulations 2023 have been met.
January 2024
Andy Jeffries
Product Director
Technical File Contact:
Clayton Woolham
Compliance Ofce & industrial Designer
21 Lansdown Place Lane, Cheltenham,
Gloucestershire, GL50 2UW, UK
Name:
Position:
Address:
AUTHORISED SIGNATORY ON BEHALF OF WHYTEBIKES LTD
E-160
E-180
ELyte
E-500