51
10 Range Extender
10.2 Fitting & Technical Data
INFO: During installation, pay particular attention to the
markings on the battery holder and on the PowerMore battery.
Fitting
- Ensure the eBike battery is placed on clean surfaces only. Avoid
getting dirt, e.g. sand or soil, in the charging socket and contacts.
- The PowerMore battery may only be used in the battery holder on the
eBike.
The PowerMore battery is only permitted for installation
on the guide rails provided. The guide rails are only permitted
for use with the PowerMore battery and the compatible
bottle holder. Observe the specications of the eBike
manufacturer.
Testing the eBike Battery Before Using it for the First Time
Test the eBike battery before charging it for the rst time or
using it in your eBike. To do this, press the on/off button (5) to switch
the eBike battery on. If none of the LEDs on the battery charge indicator
(2) light up, the eBike battery may be damaged.
If at least one (but not all) of the LEDs on the battery charge indicator
(2) light up, the eBike battery will need to be fully charged before using
it for the rst time.
Do not charge or use eBike batteries if they are damaged.
Contact an authorised bicycle retailer. Charging damaged
batteries can lead to res that could endanger lives.
To Next Page