Bosch WHYTE E-Lyte 140 - Electrical Components

56
11 Electrical Components
11.1 Wiring Identication
F
C
A
D
E
B
Wiring Detail
The installation and replacement of the
electric system components requires an
advanced technical knowledge. Always take
your bicycle to an authorised retailer for
the diagnosis, repair and installation of the
electric system components.
Damage to components caused by incorrect
installation will void your Whyte and Bosch
Warranty.
Please ensure cable routing follows the
illustration. HMI cable (D) should travel above
the battery to allow smooth battery removal
and correct cable length/tension. Cable
replacement will require motor removal.
Please refer to the ‘Motor Removal’ section
of this manual.
INFO: Lights may be tted to your
E-Lyte which use the Bosch Battery
power. Please contact your Whyte
retailer for further product and
installation details.